Factory Price 99.99% Electrolytic Copper Cathodes C10100 Pure Copper Plates Small Copper Plate 1mm Copper Sheet with High Quantity
Product Description 0.5mm 0.8mm 1mm 3mm 4mm ASTM T2 H65 H62 C1100 C1220 C2400 C2600 C2600 C3712 Red Pure Copper Sheet or
Send your inquiryDESCRIPTION
Basic Info.
Model NO. | C10100 |
Transport Package | up to Standard |
Specification | customized |
Trademark | shenqiang |
Origin | China |
Production Capacity | 500000ton/Years |
Product Description
Product Description
0.5mm 0.8mm 1mm 3mm 4mm ASTM T2 H65 H62 C1100 C1220 C2400 C2600 C2600 C3712 Red Pure Copper Sheet or Brass Copper PlateIntroduction:Copper Plate, made of pure copper or copper alloy in various shapes including rods,wires, plates, strips,tubes, foils,ect.,collectively referred to as copper.Copper materials include copper plates, copper rods,copper tubes,copper strips,copper wires,copper bars,copper materials.1. The surface of hot rolled plate should be clean; Delamination, cracks, peeling, inclusion and green rust are not allowed, but repair is allowed, and the thickness of the plate should not exceed the allowable deviation after repair.The surface of hot rolled plate is allowed to have slight and local scratches, spots, pits, pressed objects, wrinkles, rollermarks and other deviations that do not make the thickness of the plate exceed the allowable deviation. 2. The surface of cold rolled plate should be smooth and clean; Delamination, cracking, peeling, inclusion and green rust are not allowed.The surface of the cold-rolled sheet is allowed to have slight and local scratches, spots, pits, pressed objects, wrinkles, roller marks, oil marks and other deviations that do not make the thickness of the sheet exceed the allowable deviation.Product Name | Copper plate/Sheet |
Thickness | 0.1mm-120mm |
Material | T1,T2,C10100,C10200,C10300,C10400,C10500,C10700,C10800,C10910,C10920,TP1,TP2,C10930,C11000,C11300,C11400,C11500,C11600,C12000,C12200,C12300,TU1,TU2,C12500,C14200,C14420,C14500,C14510,C14520,C14530,C17200,C19200,C21000,C23000,C26000,C27000,C27400,C28000,C33000,C33200,C37000,C44300,C44400,C44500,C60800,C63020,C65500,C68700,C70400,C70600,C70620,C71000,C71500,C71520,C71640,C72200,etc |
Hardness | 1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc |
Surface | mill,polished,bright,oiled,hair line,brush,mirror,sand blast,or as required |
Export to | Singapore,Indonesia,Ukraine,Korea,Thailand,Viet Nam,Saudi Arabia,Brazil,Spain,Canada,USA,Egypt,India,Kuwait,Dubai,Oman,Kuwait,Peru,Mexico,Iraq,Russia,Malaysia,etc |
Application | 1. Pancake Coil for ACR, General Engineering Applications2. LWC Coil for ACR, General Engineering Applications3. Straight Copper Tubes for ACR and Refrigeration4. Inner-grooved copper tube for ACR and Refrigeration5. Copper Pipe for Transportation System of water, gas and oil6.PE-coated copper tube for water/gas/oil transportation system7.Semi-finished Copper tube for industrial applications |
Product Features:It has good electrical conductivity, thermal conductivity, corrosion resistance and processing properties, and can be welded and brazed. It contains less impurities that reduce electrical conductivity and thermal conductivity, and a small amount of oxygen has little effect on electrical conductivity, thermal conductivity and processing properties, but it is easy to cause "hydrogen disease", and it is not suitable for processing (annealing, annealing, welding, etc.) and use.
Table 1. chemical composition of Copper Plate/Sheet
Chemical Requirements | ||||||||||
CU+AG (%) | SN (%) | ZN (%) | PB (%) | NI (%) | FE (%) | SB (%) | S (%) | AS (%) | BI (%) | O (%) |
≥99.90 | ≤0.002 | ≤0.005 | ≤0.005 | ≤0.005 | ≤0.005 | ≤0.002 | ≤0.005 | ≤0.002 | ≤0.001 | ≤0.06 |
Alloy | Chemical Composition | ||||
QB | JIS /ASTM | Cu | P | O | Other |
T2 | JIS C1100 | 99.9 | 0.015-0.040 | - | balance |
TU | ASTM C10300 | 99.95 | 0.001-0.005 | - | balance |
TP1 | JIS C1220 | 99.9 | 0.004-0.012 | - | balance |
Table 2. Typical mechanical properties for Copper Plate/Sheet
Grade(China) | Grade(Japan) | Temper | Vickers Hardness (HV) | Tensile strength(Mpa) | Elongation(%) |
T2/T3/TP1/TP2 | C11000/C1201 | M | - | ≥290 | ≥40 |
C1220.etc. | Y4 | 75-125 | 325~410 | ≥35 | |
Y2 | 85-145 | 340~460 | ≥25 | ||
Y | 105-175 | 390~530 | ≥13 | ||
T | - | ≥490 | - |
APPLICATION:1)Further making utensil.2)Solar reflective film3)The appearance of the building4)Interior decorating:ceilings,walls,etc.5)Furniture cabinets6)Elevator decoraction7)Signs,nameplate,bags making.8)Decorated inside and outside the car9)Household appliances:refrigerators,microwave ovens,audio equipment,etc.10)The consumer electronics:mobile phones,digital cameras,MP3,U disk,etc.
Company Introduction:
Shandong Shenqiang steel pipe manufacturing Co., Ltd. is a professional manufacturer engaged in the production, sale and service. The main special steel production and sales enterprises have formed a sales cluster of high-efficiency, energy-saving and long-life steel products based onCarbon/Stainless Steel Coil/Plate/ Pipe/Strip/Rod/Angle Bar/Channel Bar/H Beam/Flat Bar, Galvanized Coil//Plate/ Pipe/Strip/Rod/Profile/PPGI, Aluminum Products/Copper Products/Nickel Alloy in China. The products are well-known at home and abroad. We have reached a long-term strategic cooperation relationship with Tisco Steel, Baosteel, Jinan Steel and Tianjin Steel. We have a new material product cluster represented by high-performance carbon steel, stainless steel, alloy, nickel-based alloy, aluminum and copper plates. We owned the complete production technique and related equipments for coking, sintering, iron, steel, steel rolling etc, also including the related energy source power system. Meanwhile, we have reached the production technique` s completeness and systematicness at the modern steel industry. From the acquisition of raw materials, packaging and exportation, Shanghai Huanan Steel ensures only the best quality of products by assigning professional experts at every stage of production.
FAQ
Q1. How long can make delivery?If it is in stock, it is usually 5-10 days. Or, if there is no inventory, 15 working days, depending on the quantity.Q2. Can you accept customize?Yes. It can be customized as per the customers' request.Q3. Are you trading company or manufacturer ?We are professional manufacturer for steel products, and our company also is a very professional a trade company for steelproducts.we can also provide a wide range of steel products.Q4.What are the advantages of your company ?We have many professionals, technical personnel, more competitive prices and best after-dales service than other steel companies.Q5: Do you provide after-sale service? We provide after-sales service and offer 100% guarantee on our products.