News

Feb 19, 2025

Worldwide Copper Tubes, Pipes and Fitting Market to Reach 5.3M Tons and $68.4B by 2030 - News and Statistics - IndexBox

Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform. IndexBox has just published a new report: World - Copper Tubes, Pipes And Fittings - Market

Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.

IndexBox has just published a new report: World - Copper Tubes, Pipes And Fittings - Market Analysis, Forecast, Size, Trends And Insights.

The global market for copper tubes, pipes, and fittings is set to experience growth over the next six years, with a forecasted CAGR of +0.4% in volume and +2.5% in value from 2024 to 2030. This expansion is driven by increasing demand, positioning the industry for significant gains in market volume and value by the end of the forecast period.

Driven by increasing demand for copper tubes, pipes and fitting worldwide, the market is expected to continue an upward consumption trend over the next six-year period. Market performance is forecast to retain its current trend pattern, expanding with an anticipated CAGR of +0.4% for the period from 2024 to 2030, which is projected to bring the market volume to 5.3M tons by the end of 2030.

In value terms, the market is forecast to increase with an anticipated CAGR of +2.5% for the period from 2024 to 2030, which is projected to bring the market value to $68.4B (in nominal wholesale prices) by the end of 2030.

In 2024, global copper pipe and fitting consumption stood at 5.2M tons, leveling off at the previous year. Overall, consumption continues to indicate a relatively flat trend pattern. Global consumption peaked at 5.3M tons in 2022; however, from 2023 to 2024, consumption remained at a lower figure.

The global copper pipe and fitting market value totaled $59B in 2024, growing by 4.8% against the previous year. This figure reflects the total revenues of producers and importers (excluding logistics costs, retail marketing costs, and retailers' margins, which will be included in the final consumer price). The market value increased at an average annual rate of +1.2% from 2013 to 2024; the trend pattern indicated some noticeable fluctuations being recorded in certain years. Global consumption peaked at $62.3B in 2022; however, from 2023 to 2024, consumption failed to regain momentum.

China (1.4M tons) remains the largest copper pipe and fitting consuming country worldwide, comprising approx. 27% of total volume. Moreover, copper pipe and fitting consumption in China exceeded the figures recorded by the second-largest consumer, India (538K tons), threefold. The third position in this ranking was taken by the United States (457K tons), with an 8.9% share.

From 2013 to 2024, the average annual rate of growth in terms of volume in China was relatively modest. In the other countries, the average annual rates were as follows: India (+3.3% per year) and the United States (-0.2% per year).

In value terms, the largest copper pipe and fitting markets worldwide were China ($14.7B), the United States ($7.5B) and India ($5.9B), together comprising 47% of the global market. Japan, Indonesia, Brazil, Russia, Mexico, Italy and Germany lagged somewhat behind, together accounting for a further 25%.

Indonesia, with a CAGR of +4.9%, recorded the highest growth rate of market size in terms of the main consuming countries over the period under review, while market for the other global leaders experienced more modest paces of growth.

The countries with the highest levels of copper pipe and fitting per capita consumption in 2024 were Italy (2.4 kg per person), Japan (2.1 kg per person) and Germany (1.4 kg per person).

From 2013 to 2024, the biggest increases were recorded for Indonesia (with a CAGR of +2.7%), while consumption for the other global leaders experienced more modest paces of growth.

In 2024, approx. 5.1M tons of copper tubes, pipes and fitting were produced worldwide; picking up by 1.6% against 2023 figures. Overall, production continues to indicate a relatively flat trend pattern. The most prominent rate of growth was recorded in 2021 when the production volume increased by 12% against the previous year. Over the period under review, global production attained the peak volume at 5.2M tons in 2022; however, from 2023 to 2024, production remained at a lower figure.

In value terms, copper pipe and fitting production totaled $59.6B in 2024 estimated in export price. The total output value increased at an average annual rate of +1.3% from 2013 to 2024; the trend pattern indicated some noticeable fluctuations being recorded in certain years. The pace of growth was the most pronounced in 2021 with an increase of 29%. Global production peaked at $62.9B in 2022; however, from 2023 to 2024, production remained at a lower figure.

The country with the largest volume of copper pipe and fitting production was China (1.7M tons), accounting for 34% of total volume. Moreover, copper pipe and fitting production in China exceeded the figures recorded by the second-largest producer, India (452K tons), fourfold. The third position in this ranking was held by the United States (343K tons), with a 6.7% share.

In China, copper pipe and fitting production remained relatively stable over the period from 2013-2024. The remaining producing countries recorded the following average annual rates of production growth: India (+2.1% per year) and the United States (-1.4% per year).

In 2024, purchases abroad of copper tubes, pipes and fitting decreased by -5.2% to 1.1M tons, falling for the second year in a row after two years of growth. Overall, imports, however, showed a relatively flat trend pattern. The pace of growth was the most pronounced in 2021 when imports increased by 16% against the previous year. Over the period under review, global imports hit record highs at 1.3M tons in 2022; however, from 2023 to 2024, imports stood at a somewhat lower figure.

In value terms, copper pipe and fitting imports shrank to $14.4B in 2024. In general, total imports indicated a notable expansion from 2013 to 2024: its value increased at an average annual rate of +2.4% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2024 figures, imports decreased by -12.4% against 2022 indices. The pace of growth appeared the most rapid in 2021 with an increase of 44%. Global imports peaked at $16.4B in 2022; however, from 2023 to 2024, imports failed to regain momentum.

In 2024, the United States (150K tons), followed by India (100K tons) represented the main importers of copper tubes, pipes and fitting, together achieving 22% of total imports. The following importers - Thailand (49K tons), the UK (44K tons), Turkey (40K tons), Italy (40K tons), France (38K tons), Germany (37K tons), the Netherlands (34K tons) and Spain (32K tons) - together made up 28% of total imports.

From 2013 to 2024, the biggest increases were recorded for India (with a CAGR of +14.4%), while purchases for the other global leaders experienced more modest paces of growth.

In value terms, the United States ($2.2B) constitutes the largest market for imported copper tubes, pipes and fitting worldwide, comprising 15% of global imports. The second position in the ranking was taken by India ($1B), with a 7% share of global imports. It was followed by Germany, with a 4.6% share.

In the United States, copper pipe and fitting imports expanded at an average annual rate of +5.6% over the period from 2013-2024. The remaining importing countries recorded the following average annual rates of imports growth: India (+15.7% per year) and Germany (-1.1% per year).

Tubes and pipes of refined copper represented the major imported product with an import of about 708K tons, which resulted at 63% of total imports. Tube or pipe fittings, couplings, elbows, sleeves of copper alloys (251K tons) took the second position in the ranking, distantly followed by tubes and pipes of copper-zinc base alloys (brass) (57K tons) and tube or pipe fittings, couplings, elbows, sleeves of refined copper (54K tons). All these products together held near 32% share of total imports. Tubes and pipes of copper alloys other than copper-zinc, cupro-nickel or nickel-silver (44K tons) followed a long way behind the leaders.

Tubes and pipes of refined copper was also the fastest-growing in terms of imports, with a CAGR of +1.7% from 2013 to 2024. Tube or pipe fittings, couplings, elbows, sleeves of refined copper and tube or pipe fittings, couplings, elbows, sleeves of copper alloys experienced a relatively flat trend pattern. tubes and pipes of copper-zinc base alloys (brass) (-3.0%) and tubes and pipes of copper alloys other than copper-zinc, cupro-nickel or nickel-silver (-5.5%) illustrated a downward trend over the same period. From 2013 to 2024, the share of tubes and pipes of refined copper increased by +7.9 percentage points. The shares of the other products remained relatively stable throughout the analyzed period.

In value terms, tubes and pipes of refined copper ($7.5B), tube or pipe fittings, couplings, elbows, sleeves of copper alloys ($4.5B) and tube or pipe fittings, couplings, elbows, sleeves of refined copper ($1.1B) were the products with the highest levels of imports in 2024, together comprising 91% of global imports.

Among the main imported products, tube or pipe fittings, couplings, elbows, sleeves of refined copper, with a CAGR of +3.6%, recorded the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other products experienced more modest paces of growth.

In 2024, the average copper pipe and fitting import price amounted to $12,734 per ton, surging by 3.7% against the previous year. Over the period from 2013 to 2024, it increased at an average annual rate of +1.9%. The pace of growth was the most pronounced in 2021 an increase of 24%. Global import price peaked in 2024 and is likely to see steady growth in the near future.

Prices varied noticeably by the product type; the product with the highest price was tube or pipe fittings, couplings, elbows, sleeves of refined copper ($20,511 per ton), while the price for tubes and pipes of copper-zinc base alloys (brass) ($9,301 per ton) was amongst the lowest.

From 2013 to 2024, the most notable rate of growth in terms of prices was attained by copper tube or pipe fitting (+3.2%), while the other products experienced more modest paces of growth.

In 2024, the average copper pipe and fitting import price amounted to $12,734 per ton, picking up by 3.7% against the previous year. Over the last eleven-year period, it increased at an average annual rate of +1.9%. The pace of growth appeared the most rapid in 2021 when the average import price increased by 24%. Over the period under review, average import prices reached the peak figure in 2024 and is expected to retain growth in the immediate term.

There were significant differences in the average prices amongst the major importing countries. In 2024, amid the top importers, the country with the highest price was Germany ($17,815 per ton), while the Netherlands ($8,926 per ton) was amongst the lowest.

From 2013 to 2024, the most notable rate of growth in terms of prices was attained by Germany (+2.6%), while the other global leaders experienced more modest paces of growth.

For the third consecutive year, the global market recorded decline in shipments abroad of copper tubes, pipes and fitting, which decreased by -3.1% to 1.1M tons in 2024. Over the period under review, exports, however, continue to indicate a relatively flat trend pattern. The most prominent rate of growth was recorded in 2021 with an increase of 16%. As a result, the exports attained the peak of 1.3M tons. From 2022 to 2024, the growth of the global exports remained at a lower figure.

In value terms, copper pipe and fitting exports shrank slightly to $14.4B in 2024. In general, total exports indicated moderate growth from 2013 to 2024: its value increased at an average annual rate of +2.3% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2024 figures, exports decreased by -11.9% against 2022 indices. The most prominent rate of growth was recorded in 2021 when exports increased by 45% against the previous year. Over the period under review, the global exports reached the maximum at $16.4B in 2022; however, from 2023 to 2024, the exports failed to regain momentum.

China represented the largest exporting country with an export of about 365K tons, which recorded 33% of total exports. Vietnam (107K tons) held a 9.7% share (based on physical terms) of total exports, which put it in second place, followed by Germany (6.3%), Italy (6.2%), Greece (5.4%) and Thailand (5.3%). South Korea (46K tons), Malaysia (37K tons), the United States (36K tons) and Uzbekistan (29K tons) followed a long way behind the leaders.

From 2013 to 2024, average annual rates of growth with regard to copper pipe and fitting exports from China stood at +3.3%. At the same time, Uzbekistan (+27.8%), Vietnam (+19.6%), Thailand (+5.4%) and Greece (+1.4%) displayed positive paces of growth. Moreover, Uzbekistan emerged as the fastest-growing exporter exported in the world, with a CAGR of +27.8% from 2013-2024. The United States and Malaysia experienced a relatively flat trend pattern. By contrast, Italy (-1.6%), South Korea (-2.8%) and Germany (-5.8%) illustrated a downward trend over the same period. Vietnam (+8.2 p.p.), China (+7.9 p.p.), Uzbekistan (+2.6 p.p.) and Thailand (+2 p.p.) significantly strengthened its position in terms of the global exports, while Italy, South Korea and Germany saw its share reduced by -1.9%, -2.1% and -6.9% from 2013 to 2024, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.

In value terms, China ($3.9B) remains the largest copper pipe and fitting supplier worldwide, comprising 27% of global exports. The second position in the ranking was held by Germany ($1.5B), with a 10% share of global exports. It was followed by Italy, with an 8.2% share.

From 2013 to 2024, the average annual rate of growth in terms of value in China amounted to +4.6%. The remaining exporting countries recorded the following average annual rates of exports growth: Germany (-1.9% per year) and Italy (+1.3% per year).

Tubes and pipes of refined copper was the key exported product with an export of about 746K tons, which finished at 68% of total exports. It was distantly followed by tube or pipe fittings, couplings, elbows, sleeves of copper alloys (216K tons), achieving a 20% share of total exports. Tube or pipe fittings, couplings, elbows, sleeves of refined copper (47K tons), tubes and pipes of copper-zinc base alloys (brass) (46K tons), tubes and pipes of copper alloys other than copper-zinc, cupro-nickel or nickel-silver (32K tons) and tubes and pipes of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) (17K tons) took a little share of total exports.

Tubes and pipes of refined copper was also the fastest-growing in terms of exports, with a CAGR of +2.0% from 2013 to 2024. At the same time, tube or pipe fittings, couplings, elbows, sleeves of refined copper (+1.2%) displayed positive paces of growth. Tube or pipe fittings, couplings, elbows, sleeves of copper alloys experienced a relatively flat trend pattern. By contrast, tubes and pipes of copper alloys other than copper-zinc, cupro-nickel or nickel-silver (-3.9%), tubes and pipes of copper-zinc base alloys (brass) (-4.1%) and tubes and pipes of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) (-4.8%) illustrated a downward trend over the same period. From 2013 to 2024, the share of tubes and pipes of refined copper increased by +8.3 percentage points. The shares of the other products remained relatively stable throughout the analyzed period.

In value terms, the largest types of exported copper tubes, pipes and fitting were tubes and pipes of refined copper ($8.1B), tube or pipe fittings, couplings, elbows, sleeves of copper alloys ($4B) and tube or pipe fittings, couplings, elbows, sleeves of refined copper ($1.1B), with a combined 91% share of global exports.

Tube or pipe fittings, couplings, elbows, sleeves of refined copper, with a CAGR of +4.0%, recorded the highest rates of growth with regard to the value of exports, among the main exported products over the period under review, while shipments for the other products experienced more modest paces of growth.

The average copper pipe and fitting export price stood at $13,061 per ton in 2024, approximately reflecting the previous year. Over the period from 2013 to 2024, it increased at an average annual rate of +1.5%. The pace of growth was the most pronounced in 2021 an increase of 25%. Over the period under review, the average export prices attained the maximum at $13,194 per ton in 2023, and then reduced slightly in the following year.

There were significant differences in the average prices amongst the major exported products. In 2024, the product with the highest price was tube or pipe fittings, couplings, elbows, sleeves of refined copper ($23,526 per ton), while the average price for exports of tubes and pipes of refined copper ($10,797 per ton) was amongst the lowest.

From 2013 to 2024, the most notable rate of growth in terms of prices was attained by copper tube or pipe fitting (+2.8%), while the other products experienced more modest paces of growth.

The average copper pipe and fitting export price stood at $13,061 per ton in 2024, remaining stable against the previous year. Over the last eleven years, it increased at an average annual rate of +1.5%. The most prominent rate of growth was recorded in 2021 when the average export price increased by 25% against the previous year. The global export price peaked at $13,194 per ton in 2023, and then reduced modestly in the following year.

There were significant differences in the average prices amongst the major exporting countries. In 2024, amid the top suppliers, the country with the highest price was Germany ($20,921 per ton), while Malaysia ($9,540 per ton) was amongst the lowest.

From 2013 to 2024, the most notable rate of growth in terms of prices was attained by Uzbekistan (+6.0%), while the other global leaders experienced more modest paces of growth.

Source: IndexBox Market Intelligence Platform

This report provides an in-depth analysis of the global market for copper pipe and fitting. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.

Worldwide - the report contains statistical data for 200 countries and includes detailed profiles of the 50 largest consuming countries:

+ the largest producing countries

This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:

While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.

Making Data-Driven Decisions to Grow Your Business

A Quick Overview of Market Performance

Understanding the Current State of The Market and Its Prospects

Finding New Products to Diversify Your Business

Choosing the Best Countries to Establish Your Sustainable Supply Chain

Choosing the Best Countries to Boost Your Exports

The Latest Trends and Insights into The Industry

The Largest Importers on The Market and How They Succeed

The Largest Exporters on The Market and How They Succeed

The Largest Producers on The Market and Their Profiles

The Largest Markets And Their Profiles